Grinding get within range of 50nm
Smaller grinding chamber and a strong input power, is also a very small diameter grinding media to obtain high strength of the movement, the shear. The average particle size is often less than 50nm.
Use 0.1-0.8mm grinding media
Improved design of stick pin system so small zirconium beads can be high speed, centrifugal separation system, the use of smaller zirconium beads while maintaining the material smooth, high traffic.
Continuous circulation grinding chamber
Straight-type density chamber grinding chamber created, depending on the distance selected mode, the stator and the barrel, in the range of 7.5 to 13 mm, the rotor movement radial movement of the media holding, the product of the shear force is increasing, cylinder forming a continuous loop, within a short time so that the particle size to meet the requirements.
Geometric-shaped design of the grinding chamber, and to ensure uniform particle distribution.
Used in high purity, non-polluting materials
Requirements for non-polluting materials, grinding rod pin can be used zirconium oxide, tungsten carbide material; grinding barrel can use silicon carbide, polyurethane material, the use of a special ceramic material feeder.